Fuel Leak Detection Sensor

InfraSensing Fuel Leak Sensor
non-relevant transparent gif
Generators are deployed to provide backup power to facilities like server rooms, data centers, cel sites or remote telecom rooms. The generators are mostly powered through fossile fuels.

The IP, Modbus TCP, Modbus RTU (RS-485) & SNMP based fuel leak cable can detected following fuel types:
no pc required for the ServersCheck to operate once configured
Fuel typeTypical response time at 20C (68F)
#1 diesel fuel60 minutes
#2 diesel fuel120 minutes
Gasoline12 minutes
JP5 jet fuel70 minutes
JP8 jet fuel50 minutes
Jet-A jet fuel50 minutes
Fuel Leak Sensor

We offer a low cost sensor for monitoring fuel leaks 24x7 from fuel tanks for generators or fuel pipes.

The default cable length is 14ft / 4.5m and can be extended to 100ft / 30 m. The fuel leak sensing cable is designed for single use only.

The fuel leak sensing cable may be used in Class I, Division 2, Groups A, B, C, D Hazardous Locations. If wiring from module meets requirements for intrinsic safety, sensing cable may be used in Class I, Division 1, Groups A, B, C, D Hazardous Locations (Zone 0 or Zone 1 in Europe).

The fuel leak cable has following certifications:
List of certifications for the fuel sensing cable